i dont know how to replace the door hindge on my hotpiont aquarius extra model wd63,when i took out the 2 screws there must of been a couple of nuts on the other side,these have dropped down,so now i need to take the front off to find these nuts and to fit the new hindge.

neil, May 2010

Thanks very mch for your help,tokk me 15 mins tops saved me about 100 quid,thanks again.

neil, May 2010

get some one to hold/support the machine after being tipped backwards about 30 degrees you put you hand up the large hole in the machine base to retrieve the backing plate
the easiest way to refit plate is to remove the wire band on the front door seal, peel back the door seal at about the 9 o clock position put hand through hole(watch the SHARP edges) now second person to hold the plate in position while you refit the 2 door screws

wirecutterman, May 2010