Fraser asked ... Spares for power craft ppcs 38cc?    |    FB asked ... Toyota Yaris Speed Camera Warning Beep?    |    Ela asked ... Worcester 30 Cadillac combi boiler won’t fire up and the EA?    |    Alan asked ... Problem with JCB 3CX transmission?    |    Lou asked ... Mac Allister 35cm electric lawn mower?    |    Click here to ask your question

engine stalling when moving off when stating from hot?

Renault clio 1.2 8v 2001 car starts from cold runs normal if car is stopped for small duration, wont run clean on restart stop gap remedy..
Start car, allow car to tick over, after about 30sec revs drop to almost zero, then stabilise at 800 rpm car is then ok to drive if you don’t do this car will still drop to zero while in motion
the car has 72000 miles on clock
the car is a recent purchase and I don’t know its history,
After the car has first been run on first start of the day
on every subsequent start that day you have to wait on the car tick over dropping to almost zero and then resetting itself to 800rpm,
before you can drive away in it
if you don’t the car will come to almost a stall while your driving, even with foot hard on accelerator pedal
The car showed fault code p0443
evaporative emission system purge control valve unit
and also
fault code p0136 / 02 sensor circuit / bank 1 sensor 2

these fault codes have been removed
arthuro, May 2010
I just erased the fault codes

arthuro, May 2010
just deleted fault codes

arthuro, May 2010
Did you just delete the fault codes or did you fix the faults as indicated? if you just deleted them you have'nt fixed the problem

nigel, May 2010
link Click here to see other fixes for Renault Clio.