I have just moved a door contact and the system will not reset from engineer mode. the keypad says "zone flt" and it scrolls through all the zones as being in fault. the system is a 9651 model. I did disconect the power cables from the mcb board before starting but reconnected when I finished

Wayne, May 2010

Yes boys I did check the fuses, I even managed to remove them all on my own and put them back again wow that was tricky, I even used a multi meter to double check the bad boys.
Nick you were really helpful on the phone but I can't understand why the answers have to be so sarcastic, come on guys some people just need a little guidance, i'm sure you will one day.
Good news thou, I got home today and the system is now showing healthy, so I don't know what happened, at least I can say it wasn't the fuse acorn, but thanks anyway, thats probably why you couldn't tell me which one had blown!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Wayne, June 2010

OMG another one that has checked the fuses, of course you have, how silly of me to ask, you looked with your eyes didnt you and it seemed fine.
Now heres a clue, fuses dont have names, John, Paul, Andrew, etc etc, they are 1 amp quick blow fuses,
Plus your gonna have another problem once youve done this, i so hope you know the engineering code, all will become clear soon.
Regards
Nick 07842 480037

Nick, June 2010

Thank you for the answer but which fuse would it be as I checked all the fuses, would it have a specific "name"

Wayne, June 2010

You've blown a fuse

acorn, May 2010