Indicators work with no problem, but when I try to use the hazard switch - nothing happens except for an annoying buzzing sound.

The engine management light is on, will be down the garage ASAP to check that, would this cause any problems with the hazard lights?

Daz, June 2010

Thanks for that, but even after changing it, same problem. May have found out what the problem is though - looks like the previous owner made a hash of the electrics when they installed the alarm as many of the wires have been cut and soldered - looks like another trip to the auto leccy's.

Daz, July 2010

No the problems are not linked, the hazzard problem will be with the switch, easy and cheap to fix yourself, remove the shroud around the steering column and remove the screw holding the switch assembly and undo the connector, go to a scrap yard or look on ebay for a replacement, or you might be luck and give it a spraying of WD40 and it might come good!

nigel, June 2010