Hi I have a Kawasaki kle 500 A1 for some reason the left cylinder stops firing when I first star the engine
there is a good spark but the plug is wet with fuel when i remove it any ideas.

John, July 2010

Thanks for your reply striped carbs down and rebuilt then bike now runs fine cheers.

john, July 2010

Sounds like its flooding badly, remove carb, remove floatbowl & inspect float for puncture & possible fuel inside it, check float needle for wear(groove around the tip) also the needle valve seat for wear/obstruction/muck.Check float & needle for free operation & check correct float height.

2 stroke Ted, July 2010