I'll probably find out when I get there but just not sure whether to start from under the bonnet or from the dashboard side! Thanks for any help.

Tim, July 2010

weres the correct position

matt, June 2013

Many thanks for the answers

Tim, July 2010

will need to remove fixing bolts from under bonnet [think they also hold washer bottle bracket] also on convoy i think you can leave linkage in situ and just remove link rod circlips on motor bracket and where it fits to l/h side of linkage.you will also need to remove linkage rod from motor--be very careful not to break it ease it off gently !then you can lift out motor and bracket assy . make sure when refitting that you put crank arm in correct position or they wont park in correct position.

k, July 2010

remove n/s plastic glove box assy,2 philips screws on underside and pull off along the top,remove wiper arms and nuts onto wheel boxes,you will see the motor when the glove box comes off and think the wiper motor and linkage comes off as a unit,now would be a good time for a good look at the wheel boxes-bad for wearing! and rebuild in reverse,good luck

wickham, July 2010