2 hours ago Jo asked ... How to engage clutch on old sewing machine to engage needle?    |    Jacky asked ... Miele Vacuum cleaner?    |    Ben asked ... Toyota Yaris French or Japanese?    |    Andy asked ... How can I mend my MacAlistair 450w hedge trimmer?    |    Felix asked ... Hitachi vt-m70em?    |    Click here to ask your question

E20 fault code Zanussi ZWF1640W?

What does this fault code mean - what part has failed
Stops in the middle of a programme
Liza, June 2006
The manual says this is due to a blockage. Check your hoses, make sure they have not been squashed / blocked. If they are OK, check the filter at the front of the machine, it's under the flap. Careful, when you open the cap a lot of water will leak out, so be prepared with a tray or something. Losen the cap, let some water drain then empty the tray, keep going then eventually pull out the filter. Clean it out completely and refit. Test the machine, it should work ok. Worked for me.

Raj, January 2007
link Click here to see other fixes for Zanussi.