Did you find anyone that could fix the broken cable on the Natuzzi recliner? I am having no luck locating anyone that can help.

Jim, July 2010

Really struggling to locate a replacement cable for my natuzzi electric recliner. Contacted natuzzi direct but they have not responded. Help

Vicki, July 2022

Clarification: We followed Ian's instructions, then also removed the chair arm from the frame on the side with the cable.

Cathy B, October 2014

We had a different model Natuzzi recliner so after doing the above, we also had to undo the two large bolts holding the chair arm to the frame on the side with the cable. Then we were able to reach. Easy after that.

Cathy B, October 2014

I need a Natuzzi replacement cable for my reclining sofa.

Mr Anthony, February 2013

Just replaced the cable on my Natuzzi recliner. Turn the chair/sofa on its back. Undo the four square drive screws/bolts of the foot rest. Undo the two screws that hold the squab (the bit you sit on) to the metal frame, these are at the back of the frame as you look down, undo the two square drive screws/bolts t the front of the squab. Lift the cushion out, replace the cable (two screws) refit squab in reverse order. New cable from Natuzzi £10. Hope this helps.

Ian, May 2012

Try a bike gear cable and a solderless barrel nipple for the handle end - I found this last item in an online specialist

HaggardPete, July 2010