home Fix label Vehicles label_important Lorries/Trucks category Ford

where are bleed points on D reg 811 diesel ford cargo?

After changing and bleeding the two filters,each one has a bleed screw,i'm still not firing,so air is probably elsewhere?,where are the other bleed points please?,shoudn't the engine bleed itself?

jimmy, July 2010

home Fix label Vehicles label_important Lorries/Trucks category Forddone

Bleed screws on side of injector pump (if Bosch). One for each injector pipe. Also make sure rubber washer/O-ring is in place between glass bowl and metal housing on pre-filter/water separator. If missing air will enter continuously and can't be bled.

JD, July 2010

have you renewed all filter seals correctly if so and they bled-up ok try slackening injector pipes and turn engine over till fuel appears then tighten up and it should run.

k, July 2010

link Click here to see other fixes for Ford.

Fix Fault - Vehicles

home label Vehicles label_important Lorries/Trucks

home Fix label Vehicles label_important Lorries/Trucks category Ford

where are bleed points on D reg 811 diesel ford cargo?

I can answer this question...

where are bleed points on D reg 811 diesel ford cargo?

I can answer this question ...

where are bleed points on D reg 811 diesel ford cargo?

Daf 530xf?

07 plate iveco daily?

How to tilt cab ford iveco cargo 0811 F reg?

DAF CF 85 460 Prime Move/Tractor 2016 "Engine Warning?

Gear selection issue after tipping cab forward, iveco 75e15?

Heater motor on my Iveco 75E15 1999?

Location of reservoir?

Daf LF 45 roof beacons?