lucky you i've just rebuilt my Dna, on the carb and cylinder head there are black pipes, for this to happen the pipes have been put back on the wrong way flushing water into the petrol and vice versa, your going to have to drain both the water and fuel systems and drain the carb.
look underneath and you'll see the bottom of the petrol tank, the tap sender and some tubes, follow the tubes and all of the tubes from the tank fit into the carb and on the carb inlet rubber.
next to the carb on the exhaust side of the bike on the cylinder head there is a big black plastic tube with a large pipe going into it, around that there are smaller pipes, when you trace the fuel lines make sure none of them are plugged into the cylinder head, if there are then take them out. remember trace your fuel lines they should all plug into the carb and the carb inlet rubber nowhere else. the V shaped metal bit attached to the bottom of the carb is water.
hope this helps
Rob, August 2010