3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

how can I replace the drive belt on Tumble drier, Beko DRCS68W?

I need to replace the drive belt which has broken. the machine is a condenser tumble drier
moos, September 2010
Hi,
I'm having the same issue. Still trying to find a belt that is the same size. First two are too big. I can get the top off and the bottom flap where the spool is but can't get the back off to put belt around the drum as wires etc. are all attached to it. Please, pelase could you help me out and advise what you did?
Thanks

Nicki, August 2013
NOT as easy as CK states!!! You need to unscrew the back of the machine, fit the belt over the drum, from the front, then attach to the motor pulley and turn/twist the drum until it slips on all the way round. Refix all the screws into their original position.

Hope that helps!!

BRP, October 2011
basically remove all the screws from the back and work your way in

ck, September 2010
link Click here to see other fixes for Beko DRCS68W.