need to change the rear brake pads no 2005 primera 1.8S but cannot get the brake caliper to release, have applied the amount of pressure i would expect to use and a bit more, am I missing something
has it 2 shallow holes in the piston if so it needs a special tool called a caliper push back tool that turns it under presure to push it back in
tony, November 2010
these should wind in,there is a tool on the market for this but sometimes you can get away with a pair of long nosed pliers,and some wind in clockwise some a/clock,try the o/s clockwise,n/s a/clock
