From switch on, and after selecting the program, and pressing start nothing happens. After about 10 seconds the 'End' light flashes (with beeps) four times. This pattern is repeated until powered down.
I assume it is a fault code but have not found any guide to what it means. Power is present ok, water feed it fine. I have checked internal connectors to the main controller, pressure switch and the door latch assembly. Also checked and cleaned the filter/drain at the bottom but am now stuck. Any help with this would be appreciated..more so from my wife as the washing is stacking up Thanks,

Richard Smith, October 2010

this is telling you the door lock is faulty.remove the lock and see if there is a brown patch on the plastic casing.if there is it could be a straight forward faulty door lock OR it might of blown the main pcb triac that feeds the door lock.no easy way of telling if pcb is damaged until you fit a new door lock!

ck, October 2010