Im at a loss as to what may be wrong with my new scooter.
Am newby, hoping to carry out any repairs myself!
After stalling the bike, by putting the sidestand down while engine was running!! unfortunately it hasnt started since. Have done few basic checks but cant locate any cutoff switch from sidestand- Any pointers that may help me get up n running would be gratefully appreciated. Cheers

Optimystic, October 2010

cheers man- i'll give that a go
fantastico:)

optymystic, November 2010

the stand withc is situeted right at the pivot point of the stand.these switchs often play up and its a safe bet to just connect or disconnect the two wires that go to it.so fid the switch then unplug it and then join the wires together LOOM SIDE then check for a spark when spinning it over from the plug you will have to take the plug out and earth it on the side of the head or another metal part of the engine.if it sparks then you have it wired ok if it doent then unjoin the wire and see if it sparks then.when its sparking put the plug back in and try starting it up.

adam bike doctor(of milton keynes motorcycle centre), October 2010