HI All,

Think that this should be quick.

Baxi Combi80eoc. Everything appears and sounds to work. Switches on. Pumps activate on heating switch on and when water is demanded.

I don't think that the pilot flame is igniting the boiler.

I have identified 2 possilble faults but would like a point in the right direction.

There appears to be 2 cables running upto the pilot light.
1. There is a single wired connection (thick white cable) that comes from the cct board up to the pilot light window. If I remove the connection from the PCB and switch on there is no spark between the connection and pcb terminal when held in very close proximity. I thought I would see a spark for the ignition.

2. There is a 240v cable running to a small black 'honeywell' Ingitor lead assembly.
http://www.clickonbathrooms.co.uk/acatalog/248097_BAXI_COMBI_80ECO_IGNITOR_LEAD_ASSEMBLY_.html
This has 240v going to it...... but I don't know what this item does. - presumably something to do with the ignition, but is that for the main gas or to light the system.

Please help???

I have also tried to suck and blow into what I thought was the air flow pipe. Not sure if that was genuine advice or not...

Please email to .. the_crjones at yahoo com


Thanks

Craig

Craig, October 2010