hi all
the oven light keeps flickering on and off and both heat and fan stop, then start, if I jiggle the selector switch it comes back on, so I'm guessing a loose/bad connection, the replacement part seems reasonable at £30, its just a matter of getting in there to replace it, how do I get to that part, I'm fairly handy, but obviously if this is going to involve gas or anything potentially lethal I'd rather not (I replaced the oven heating element a while back no probs, so not worried about getting in there, its how do i get in there!)

any pointers]

thanks
tim

tim, October 2010

Thanks Tim
Followed your advice about accessing the channels and my cooker is now working again!

Peter, April 2022

Hey T - thanks for your help. I just snatched victory from the jaws of defeat reading your v accurate and helpful advice.

William J, October 2013

help forgot which way wires go on delonghi gdf603 selector knob

jan, July 2012

HI Tim, Iam having similar problems.. seems like a loose connection as comes and goes off. But is the selector the main problem or is the element also needs to be changed??

Any advice will be helpfull..

Joshua clement, November 2011

i'll answer it myself..... lift off all the hob covers and gas thingies underneath (both bits just lift out), there are 2 screws either side of the gas bit undo these on each one, then undo the 2 screws eitherside of the oven at the front on the sides. Top section is hinged at the back and just lifts up. selector switch is now accessible.

t, December 2010