the machine wont drain away and the red led light is glowing at the inlet/outlet switch.

Gary, November 2010

I am afraid I don't have an answer for you, but I do have the same problem:( below is the link to my posting, you may like to keep an eye on it in case someone comes up with an answer for us. Good luck:)


http://www.howtomendit.com/answers.php?id=394795

Ken Chester, January 2011

The inlet/drain light is really a ' Fault' light which can occur for MANY reasons.( not just inlet or drain).
When a fault occurs, the light comes on & the machine cancels the programme, usually with water still inside. This gives the impression of a drain fault, but this is usually NOT the case.
Cancel the programme ( by pressing the start button for a few seconds). Then select & start any programme. The first thing it will do on any programme is try to drain ( takes 20 seconds or so ). If it does drain, then you know the drainage is OK. If it lets water in then the inlet is OK.
Let the machine run & BE LUCKY !

Bernii, November 2010