My laptop (Dell, Inspiron, 710m) is new, so I installed several softwares these days, such as Nero Startmart. BAD-POOL-CALLER happens twice as following

A problem has been detected and windows has been shut down to precent damage to your computer.

BAD-POOL-CALLER

If this is the first time you’re seen this stop error screen , restart your computer.if this screen appears again, follow these steps:

Check to make sure any new hardware or sofeware is properly installed . if this is a new installation , ask your hardware or sofeware manufcturer for any windows updates you might need.

If problems continue ,disable or remove any newly installed hardware or software,disable BIOS memory options such as cashing or shadowing. If you need to use safe made to remove or disable components. Restart your computer, press F8 to select advanced startup options , and then select safe mode.

Technicial information:

Stop:0x000000C2 (0x0000007, 0x00000CD4, 0x84F0AA18, 0x8505D540)

Beginning dump of physical memory

Physical memory dump complete contact your system administrator or technical support group for futher assistance..


Now IE is very slow, and I'm not sure whether it is related with Bad-Pool-caller. Expect your assistance.

xiaonan, July 2006

i need help my mini laptop acer just got the same problem please i need help on how to get rid of the blue screen , i was using it yesterday it was ok but today whenever i turn it on the after the welcome screen the blue screen appears and restarts my laptop i need help right away,

akahil72, December 2011

hey guys i have this same problem on my advent 7088 but i have no windows on and if i try installing an os it gives me this error codd.im seriously confused..i really need help

edmund..accra-ghana, December 2010

well anybody that does know?

pcvista, October 2010

dont know

peda, October 2010

I just came across this and have the same exact blue screen error and can't get the windows debugger to work which seems like the solution to the people here. I'm just really not sure how to use it. any help would be appreciated.

pc vista, September 2010

Incompatible Hardware is the most possible cause if this error occurs during an installation of an operating system, Check all hardware and connections-may be loose, also pull out RAM and gently clean contacts with an eraser, reinsert and wiggle side to side it confirm a good contact.

Mr. Know-it-all Snr, July 2010

what do you do if you get this during a installation of Vista? The installation process has just finished the expanding files process and throws up the blue screen with bad_pool_caller.... ?

Bob, May 2010

I cannot get into none of the safe mode selections and my laptop did not come with a startup disc, what else can I do

Roo, March 2010

simply put your ram is out of sync either reset bios or put new ram sticks in prob solved

one who can read blue screen code., December 2009

i had this blue screen too but i has to re format and reinstalled the OS,but its always one blue screen or the other,infact,it just happened about now.how do i resolve this?

Dare, December 2009

when you go to safe mode with networking justdo the system restore and you are done issue will be resolved

karan paschim vihar, September 2009

if u have any other computer, try connecting ur hard drive to that computer or u can use sata to USB adapter to retrieve the info from hard drive.

Vishal Punetha, New Delhi, India, August 2009

I would click on safe mode, but it still didn't work

alex, August 2009

i cant even get into safe mode, need help

alex, August 2009

Back up your important data by logging on with safe mode with Networking...download the latest drivers online and put on a CD or Flash Drive...and reinstall the OS...and then install the latest drivers after that...will permanently fix the issue of BAD-POOL-CALLER 0x000000C2 (0x0000007, 0x00000CD4, 0x84F0AA18, 0x8505D540)

Vishal Punetha, New Delhi, India {Call +91-9711005331}, March 2009

Jasonm, you´re a genius!!!!!!!
i had the same BAD POOL CALLER problem and i had resolved that problem with your suggestions!!
Please, you people, try that way before anything (it´s very simple) and then try the others tips.

Jasonm, God bless you man!!

arqueopterix, February 2009

Try doing a Parallel installation.Repair installation will not work.

Bala, January 2009

I don't get why I have to do it in safe mode when I can turn off my computer, turn it back on and get into Microsoft.com in regular mode!

kampute, December 2008

F A N T A S T I C !!

Thanks Anurag Bhardwaj, your solution works. After reenstalling, and activating, Vista five times I finally did some research and found your post. Not only did your solution solve the problem, but I learned how to use a new tool in the process . . .

Nat Ray, New Orleans, LA, USA, September 2008

If you are getting blue screen with the error code 0x000000C2 BAD-POOL-CALLER. You will be able to go to safe mode with networking. So try to logon to the computer with administrative rights in safe mode with networking by pressing F8 key on the keyboard when the computer starts and you see the logo of the manufacturer of your computer. highlight safe mode with networking by pressing the down arrow keys and highlight and hit enter on it and your computer will start in safe mode and you will be able to connect to internet. Go to https://microsoft.com and download windows debugger and run it in your computer. Now go to run and in the run box type minidump and the folder will get opened. select the one that is at the top and open it in windows debugger by going to file options of windows debugger and you will be able to know what caused the problem and you will find a resolution for it as well in it.
We download windows debugger to decipher the file in minidump folder. One more thing that we can try over here without downloading these stuffs is we can try system restore by clicking on Start-All Programmes-Accessories-System Tools-System Restore and select the date in which you think the computer was operating well and that will take care of the issue as well but it is not a permanent solution for the problem. To identify what the problem is we need to install windows debugger and open the minidump file that will have the detailed account of the problem that caused the Blue Screen to appear.

Anurag Bhardwaj

Najafgarh
New Delhi-110043

Anurag Bhardwaj, November 2007

The link was very useful in understanding what's going on with my hp pc and helped me a lot in resolving the issue i had with the computer. Now my computer is running absolutely fine and it has increased the speed of the computer to just double.

Thankyou

Anurag bhardwaj, November 2007

A problem has been detected and windows has been shut down to prevent damage to your computer

TRABAS, March 2007

Uninstall the nero package and any other software containing hardware drivers that you have installed BEFORE seeing this message. Once you have done that reboot the computer. once o/S has booted go to windows update, use the CUSTOM INSTALL option and select non priority and driver updates (there maybe several) once its downloaded and installed all the updates (you may need to visit microsoftupdate more than once) then install NERO and other drivers. This error message is a driver conflict and it produces the blue screen of death that you get. This WILL solve the problem.

Jasonm, October 2006