Hi all,

I have a 1.4 petrol 306. The heating is not currently working, the blowers work fine but its just blasting out cold air.

I've so far checked the coolant level which was fine so I removed and checked the thermostat, also fine.

Checked the hoses, the main hose from the rad to the engine is very hot howeve the next hose that leads to the heater matrix is cold.

Any ideas??

Ryan, November 2010

my heater is cold

reynolds, March 2013

hi ryan any luck sorting it, as i have the same problem .

glenn, January 2011

you may need to bleed the system. unscrew one bolt on stat housing next to the sensor and a plastic screw at the back left hand side. do all this whilst the engine is running.

matt, December 2010

have a look at the heater control valve

cdc, November 2010