Zanussi DW 908 wont fill with water,when filled manually works through cycle untill water needed again. Cold feed only, good supply. Valve stuck when opened, cleaned and freed up valve and water flowed fine with pipe to washing chamber removed, When all conected up and machine switched on water does'nt fill. Appears to be something restricting water flow mid way up side of machine. Thanks James

James, December 2010

a blocked IWMS (plastic tank up the left side looking from the front).look for black mould in bottom front corner.On the inlet valve at the back is a red tube this is a lockout on the water inlet valve and could be blocked.remove it from the valve and blow down it hard to try clear water etc

ck, December 2010