Leith asked ... Bosch Classix Type WKM41 front loader washing machine?    |    Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Noman asked ... Reverse light switch?    |    Click here to ask your question

sticky starter motor?

what part of the starter motor shall i tap gently to try and free it up so i can get it to a garage to get the problem sorted out and its exact location please help ha ha
greg no good with vans, December 2010
Thanks for your help located it straight away.

greg no good with vans, December 2010
now we can help. its fitted to gearbox [looking towardsfront of engine about 11 o'clock.] usually dual mass flywheel debris causes it to stick/fail if there is plenty of debris in starter pinion then your dual mass flywheel will need changing--now you can get a solid flywheel kit. hope it helps

k, December 2010
Sorry Its a ford Transit T350 125 The exact location would be helpfull thanks

Greg no good with vans, December 2010
you mean location of starter motor? well its usually on engine fitted so it engages with flywheel ring gear but may be fitted to gearbox so it too engages with flywheel but on some very old vehicles may be part of flywheel called a dynastarter......unless you give vehicle details it could be anywhere?

m aspel [give us a clue], December 2010
Thank you van is rather large have to get some family members round to help out thanks again and for your quick reply will try it.

Greg no good with vans, December 2010
Anywhere on the outer case.
If van is manual gearbox with ignition OFF put it in second or third gear and push vehicle back or forward a short distance this may also free starter up.
Hope vans not too big.

Maurice, December 2010