Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

How do I remove front kick panel from my AEG Favorit F40850 dishwasher?

Need to check the element as water not heating. How remove kick panel as it has no screws?
Other model info.
PNC 911 232 63200
Type 45_2DDL30

Thanks
Dave, December 2010
the element is at the back and isn't accessible from the front.you need to pull the appliance totally out.some have an s shaped metal panel on the back that can be removed to gain access to the element Or lay dishwasher on its back and remove the base.Before doing this I would remove the control pcb in the fascia and look at the circuit board near the relay.common one is pcb track blown away from relay pin.resolder track to pin will solve heating issue if this is the problem

ck, December 2010
link Click here to see other fixes for AEG.