it works fine other than not heating water, the element is fine. Could it be the pcb and are these easy to fix rather than replace

kw, December 2010

There seems to be a lot of answers that point to a bad solder joint on the relay - this is clearly a common problem but if you don't see any burning, try giving the relay a sharp whack! It worked for me and it's worked for other temperamental relays in the past!

Daves dishwasher, November 2013

Hi Ian

I have same problem, i have scoured the internet myself to try and fix as im about as much use as a chocolate teapot when it comes to fixing things. Uve most probably sorted it by now but for all those that havent heres some helpfull links.

Manual for
Electrolux esl 6115
http://www.serviceforce.co.uk/pdfs/U26459.pdf

Parts
http://www.espares.co.uk/parts/dishwashers/electrolux/esl6115/p/1083/15/0/576708?page=2

Solutions to fix heating elements / Check PCB too
http://www.fixya.com/support/r4589033-dishwasher_problems_heating_element_not

Hope this helps anyone else with same problem.

Turna.

TURNA, December 2010

remove the control pcb from the fascia panel and take the pcb out of the white plastic box.look for bad solder joints around the heater relay pins or fuse track.resolder track and pins to sort pcb
Make sure you know which connector goes where. take a photo for reference as they must go back in the same place and the right way up!!!

ck, December 2010