Hi I have a Iveco daily 2.8 on a Y reg 2001 plate.
The problem I'm having is it will not start unless I use easy start and then it will fire up but not rev above 2500/3000 RPM? I have change the fuel filter and cleaned the EGR Valve and it is still no better. Has anyone got any Ideas what the problem could be?
Thanks in advance.
Lee

Lee, December 2010

Found timing had slipped a few teeth due to top Jocky wheel collapsing, new cam belt kit fitted and now running but missing, set timing at cam shaft twelve o,clock, injector pump six o,clock and crankshaft six o,clock any Ideas? Could have bent a Valve but I don't hear any knocking or bad engine noise?

Lee, January 2011

change the filter in the ns chassis rail next to electric fuel pump

dr hgv, December 2010

see if it has a fuel pump, situated in n/s chassis rail,near gearbox-check if this is working

k, December 2010