Hi thanks for the quick response ck.

Yes, I tried it again after i sent the first question, when it's re-set from the wash cycle, the pump runs for about 15 seconds and empties the water, it then stands for about a minute and rtns to the 'ready' light.

Sometimes however all the lights go off as if it was 'off' at the mains switch and doesnt come on again until the 'on off' button is pressed off and on again.

Unplugged the washer and checked the connections to the motor and took the top of and cheched the connections to the back of the board - all seemed fine.

Plugged it back in and tried it on a 40' empty wash and the drum turned after filling but seemed to be a funny quiet 'fuzzing / clicking' sound comming from under the washer (motor area??).

Unplugged it again and rechecked, again all seemed fine, put it back on a wash and it filled but didnt continue to turn the drum this time.

Seems like a motor / dodgy connection, what do you think????????

Rudders, December 2010

connector to motor arcing/melting in the plastic plug are known issue.
remove the motor and remove the motor brushes.If they have 10mm of carbon or less on them they are worn out and need replacing

ck, December 2010