3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

Does not heat up ?

Have an Electrolux ESL 6115 dishwasher that does not heat up the water. would like to repair myself. Would think it is heater or thermostat. Is there a repair manual available ?
Geoff Hill, December 2010
normally it's one of these
pcb track/relay pin fused or bad solder joints on relay pins OR element blown
pcb can be repaired by soldering the relay and pcb tracks back up.this is in the fascia control panel and will require all connectors to be removed and the plastic casing splitting open to gain access to the pcb inside
element should be around 29ohms across the 2 terminals
Lay dishwasher on its back and remove the plastic base to gain access to the element.Metal tube shape bit in the middle at the bottom/back attached to black rubber hoses

ck, December 2010
link Click here to see other fixes for Electrolux ESL 6115.