Jon asked ... How do I remove the flywheel. Mountfield 1640h ride on mower?    |    Keith Mumby asked ... Fordson starter solenoid?    |    Suzanne asked ... Washing programme stops after 3 minutes?    |    Rif asked ... Kenwood Dishwasher KID60S20 leaking from front?    |    Fraser asked ... Spares for power craft ppcs 38cc?    |    Click here to ask your question

How can I mend my Bosch Sensixx B25L steam iron?

My iron leaks a lot of water when it is in use. I have tried putting all the settings to low during the heating up process, this doesn't help. I have tried changing the amount of water in the tank, again no good. Help - it is not useable and it is only a year old.
Stephanie, January 2011
Green button on Bosch b25l does come on so can't get no steam can any body held

Chris, December 2013
I had the same problem..so I read the manual and it was caused by pressing the steam release button before the green steam ready light had been lit. I am told if you start to press the steam button before it is ready then you are likely to suffer the issues/problems you mention.

Also worth doing the clean procedure as per the manual. I did both the above and mine is working like new now!!

hope this helps you.

Dan, May 2011
I had the same issue. I took it back to where I bought it and got a new one. Had the new for a couple of months and that's started doing the same thing. I'm going to take this one back too!!

Amadeus, January 2011
link Click here to see other fixes for Bosch.