3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

siemens dishwasher not draining ?

be kind to me I am female. I've got a siemens dishwasher, it is not draining water out,
I see on here that you unscrew the impeller to check if any blockage there. Can you tell me where the impeller is. I have found some crud when scooping out the water, is it ok to just run it on rinse to check if its OK
Lesley, January 2011
On many dishwashers (all as far as I know) the drain impeller is under a little plastic cover right at the very bottom of the internal sump under the filters. Just one security screw holds the cover in place. Sometimes the blades of the drain pump - the impeller blades - get jammed up with bits of debris.

If you can access the blades they should turn freely but with a bit of magnetic resistance from the motor.

You will need a special Torx driver security bit to get the cover off. Tweezers will help with removing the crud.

http://www.askmehelpdesk.com/appliances/screw-bakc-washing-machine-313929.html

Peccavi, January 2011
link Click here to see other fixes for Siemens.