I had a power cut today with the lights flickering for about 10 mins before the power went off completely. When the power came back on the alarm started sounding (intermittently rather than continuous) and I cannot turn it off - it seems unresponsive to any button presses.
I switched off the power to it and removed the battery (which was dud anyway) and left it for an hour but as soon as I restore power to it it starts alarming intermittently (once/sec) again. I can't see any reset buttons/switches on the panel board. Any suggestions gratefully received.

Traven, January 2011

the battery is an integral part of your alarm system mate,it must be fitted and in good condition,fit a new one,and all should be ok,also check any fuses in panel,with a meter,some times when a battery goes,it takes the battery fuse with it.

gts, January 2011

>you answered your own question,but you dont know it.!

>gts
>January 2011
Thanks gts could you be a bit more specific?

Traven, January 2011

you answered your own question,but you dont know it.!

gts, January 2011