I have bought a replacment linkage/motor for my 206, 1.4s 05. i have removed the blades and knocked out the old splindles, but cannot work out how to get the actual motor/arms and linkage out, can't see any brackets in place, just looking to do a straight swap, any advice would be great thanks

josh, January 2011

pop the large washers off that are surrounding the spindles to uncover the 36mm nuts (under the scuttle panel trim). t 10mmhe linkage is bolted onto the bulkhead next to the brake servo. on petrol models you should b able t remove linkage by removing air box only

spruce messetone, May 2011