home Fix label Security Systems label_important Home Alarm Systems category Scantronic

For gts: Scantronic 9800 Keypad?

Hi gts, I have recieved the Keypad you sent me & would like to thank you very much. But the keypad is a 9930 model not the 9827.I'm not sure it will work with the 9800+ panel, as the contacts on this one has 0v, 12v DATA & CLK.
the 9827 only has 0v, 12v & SIGNAL also no digital display on keypad.
I really appreciate your kind gesture, but I would still like to reimburse you the postage costs for the one you've sent me. Please let me know how I can do this
Cheers
Benny

Benny, February 2011

home Fix label Security Systems label_important Home Alarm Systems category Scantronicdone

no prob mate,you should have the trannie by now,i sent it by itself case it dam.the pcb,am glad to be of help,keep the old lady going,

gts, February 2011

hello gts, I have recieved the pcb thank you very much.
I was away, the parcel had arrived at work a few days ago.
Thank you once again for your kind generosity (:-)
regards
Benny

Benny, February 2011

hi bennie ,pcb on way

gts, February 2011

Goodnite mate, take it easy....

Benny, February 2011

no prob bennie,me off to bed now,take care,

gts, February 2011

Oh, thats what it means, wow, that sounds great Charles, vey much appreciated... Thanks (:-)
regards

Benny, February 2011

sorry,the transformer,you may as well have it too,then you have the full set:-)

gts, February 2011

whoops, sorry double post, the site was playing up.
What's a trannie by the way?
regards

Benny, February 2011

Good evening gts, I have recieved the keypad, thank you very much.
I swapped the pcbs in the pads, and yours works a treat! I did power down to avoid any potential problems. Thank you for also sending the spare tamper switch for the panel.
I really appreciate your kind gratitude in sending me the keypads.
regards
Benny

Benny, February 2011

and the trannie,we like to help out if and when we can mate.

gts, February 2011

no prob bennie,your pcb will be with you shortly,

gts, February 2011

Benny, February 2011

i dont like or use the menvier range,to me they look cheap,as i told their rep a while ago,my scanny stuff looks the part,

gts, February 2011

Is that what that they said to you? What a cheek!!!. I suppose once they grow big, they don't care. But I do like the scantronic panels, and the 9800+ speaks for itself. Don't know about the current cooper Menvier partnership & the range of 97X1 panels.

What I'LL do is swap the pcb in the keypads. The one I fried was practically new & only recently took it out of the attic to fit a separate keypad upstairs!! It was collecting dust for the last 8 years, and I decided to fit it at last, but what do I do??? bugger it up!!!.

I'LL let you know as soon as I get it.
Thanks again GTS
cheers

Benny, February 2011

give you a laugh,i contacted cooper sec,and ask how they can justify charging that amount for just the keypad,when i can buy the complete thing cheaper,
guess what their answer was?.......................
we dont need too,!!!!!aint that grand :-)

gts, February 2011

its a great panel bennie,we have fitted over a thousand of them,the original keypad was a pest because that stupid door kept getting broken off,and took the look of the unit,with the pcb and trannie,you should be able to keep it going for a long while,i dont know the state of the programming in the pcb,you may have to reset it back to factory conditions,its an fiddly thing to package,but you should get it soon,regards,charles m

gts, February 2011

Hi gts, thank you for the battery change advice. Yeh the costing on the 9930 keypads just wierd.I know cos I was considering to upgrade to a 9751 panel cos I just couldn't get hold of the 9827 pad. But I'm really grateful to you for sending me the keypad. Couldn't thank you enough. This 9800 panel has served me so well, I just did not want to change it.
Regards
Benny

Benny, February 2011

keypad on its way bennie,the pcb to follow,have included the tamper switch and trannie,the round disc that the tamper switch leans on has gone walkabouts,but am sure you can deal with that,
:-)

gts, February 2011

scantronic did a retro fit kit,it was the new pcb plus that new keypad i sent you,then they sold it as the 9651,it was to help us guys out of a hole,but here is a laugh,if you want to buy that new keypad by its self,it costs,£67.00,but if you buy the 9651 panel,complete with the keypad,we get them for,£45.00 plus vat,!go figure,:-)these are trade costs,

gts, February 2011

just enter the engineering code,no need to power down the panel,just remove old battery,fit new one ,

gts, February 2011

Hi gts, lol! I've learn't my lesson.... not to work live on the panel
(:-) I won't risk it, cant afford to.
Thank you very much for the pcb, appreciate that. I will most definately keep it cos its a gem of a panel.

Just a quick question gts, I want to change the battery in the panel. Do I enter engineer code, power down mains, & change the battery? Will this not make the external sounder come on?
Cheers & thanks again mate.
regards
Benny

Benny, February 2011

and dont you dare flog it on ebay!!!!(unless i get my share ):-)

gts, February 2011

will also send you a spare mother board,might as well have the set:-)they tell me there is one in store.you prob will never need it,(unless you work on panel live again)sorry,could not resist,:-) just my twisted humour benny.if you cant have a laugh,you may as well be dead,regards,

gts, February 2011

will send you the correct keypad,and its no bother.
your very welcome to it mate,regards,charles maguire gts

gts, February 2011

Hello gts, don't worry about it, its not your fault. Its nice to see someone going out of their way to help others. The addy is:

C. Weerasinghe
Comet
Engineers Way
Wembley Retail Park
HA9 0ER

I'LL let you know once I get it. I'm really grateful for this gts, thank you very much.
Kind regards
Benny.

Benny, February 2011

and honestly,dont worry about the postage,my staff waste more more on post it notes,:-)

gts, February 2011

and sorry for spelling your name wrong,its just not been my week:-)

gts, February 2011

hi bennie,am a idiot,i sent you the liq display unit,what a dope,will rectify it,keep that unit,its for the 9651 unit,am not worried about the postage,just annoyed at myself for making such a stupid error,ive only been in the trade 37 years!!!gimmi your addy again.cheers,

gts, February 2011

link Click here to see other fixes for Scantronic 9827.