Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

how do i reset the tamper light on veritas 8?

the cable leading to the door contact has been completley cut through. i have been under the floor a pushed excess cable up and reconnected exactly the same colour for colour. as soon as i moved the cable the alarm went off and wouldn't turn off so i took the front panel off, entered the code and it stopped. now the panel has the tamper light on and the affected zone light (zone 8) is still on. how do i reset the panel back to normal?
RICH, February 2011
You took the lid off the panel and didn't put it back?

Guess why you've still got a tamper fault.

Put it back, enter your code, once / twice, don't know with your panel.

If you've made your repair quickly, problem solved.

acorn, February 2011
thats a little cryptic for me. i asume you mean as i took the front panel off thats why the tamper light is on but do you mean if i put the panel back on and re enter code all should be ok?

rich, February 2011
Think about what you did, then think why it sees a tamper.

Then put it all back together and try the code again.

Alarm, February 2011
link Click here to see other fixes for Veritas 8.