3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

Engine wont start?

I have a husqvarna yth1542xp, it won't start. It will give a clicking sound when I press the clutch/brake pedal however it will not turn the engine over. y battery power when checked using a volt meter indicates that it has 12.5 volts not connected to the electrical system. Do I need another starter? Quite often I have to muniplate the clutch pedal several times up/down to get the engine to run. Thanks
James, February 2011
make sure that the batteries leads are very tight and clean,normaly when you get clicking at start up , its bad cennections, at battery leads" and take out spark plug, clean it , or replace with new one, you could still have full battery 12,5 v, but if the leads are not tight it cant start,, check that first..

j, February 2011
link Click here to see other fixes for Husqvarna YTH1542XP.