machine won't complete cycle.starts then stops with all lights/leds flashing.
I've replaced front right control pcb.
still got same symptons,any ideas on whats wrong? and rough cost to fix?
Cheers Gary

gary herbert, March 2011

Send the main module (from the bottom of the machine in the back in a plastic box) to us for test/repair. Cost is £49.90+vat for a repair or £5+vat if no fault found. Postage is £5+vat. Send it to EMW Electronics, The Barn, Millfield, Oxton, Notts, NG25 0TD Tel 0115 9652118 www.emwelec.co.uk along with a note of your name/address/daytime tel no.

EMW, March 2011

dis connect motor turn to empty
if it has the same prob then the eprom on the main board has gone you will find the board at the back on the left hand side
the only people to repair this would be indesit as they have the lead that plugs into the board to link it to a laptop and reprograham the board
if you mc is more than 5years old the cost would be more than the mc is worth under 5 and all you pay is labour which could be up to £120

samsrepairs, March 2011