My dishwasher 7 days ago would stop shortly after starting with an error code IE after checking on web i found that it was an inlet valve issue and removed and cleaned valve and put back together.I found that dishwasher would work but then short the power supply and the trip switch would go,i thought that some water may have got on parts so i left for a week to dry out. i have just checked inlet valve and looked for leaks today and restarted machine on quick wash ( 26 mins ) to find machine working well until rinse cycle ( 18 mins ) and again power supply would trip the circuit breaker.... no evidence of water leaking?? do i need to get a repairer in or again is it something simple ?

Stuart Varsity, March 2011

Hi, I have the same problem, I have just changed the outlet pump $22 as there was water inside of it. Still had problem thinking do I change the inlet valve, $40. A few minutes ago I found the following site which makes sense that it will be a problem on the circuit board
http://www.yellow-mini.co.za/dishwasherfromhell/
I might just give it a few hits, and if there is no joy, it will go to the tip. His fix was too involved for me and it still failed.
Good luck,
Stephen

Stephen Melbourne, April 2011