Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

indesit dryer IS70C tripping switch?

My indesit IS70C condenser dryer is tripping the ELCB intermittently, the cause seems to be water lodging below both the fan and the heating element. what could be causing the water to lodge here?.
ciaran, April 2011
correction,thats the right hand side looking at it from the rear

MM, April 2011
the float is housed in the grey thing at the left hand side of the dryer at the back,turn off power before you open it,you will find the float is stuck to the bottom of the tank ,clean it and all should be well

mm, April 2011
the pump at the back of the machine is faulty,or the float switch has stuck down not allowing the pump to pump water to the tank

mm, April 2011
link Click here to see other fixes for Indesit.