GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

EDC blink codes on an Iveco Tector 52 plate?

EDC light is on and sequence of blinks when you press diagnostic button is 2 slow and 9 fast. Any ideas?
katie, April 2011
Don't let this person on here called Fred who works for iveco workon he looked at my mate's daily and f--ked up.had to get it relayed to dealer to get fault found. l

jim, August 2011
Hi that is a heater grid relay problem. I work for Iveco need any more help give me a call. 07870362825

Fred, June 2011
hiya..regarding your blink test,,2.9 stands for i quote,,,,,pre_post heating resistance control relay,,,i`d look into fuse`s etc before going too deep,the heating system doesn`t even come into play unless outside temp goes below 5 degrees.

brian, May 2011
The daf 45 lf and the iveco with a tector engine have the same engine,both are cummins with the daf having a pacar badge and iveco with tector

moleywart, May 2011
I had this with my Iveco tector horsebox, from what I have been told by 2/3 mechanics it’s a common problem with these tectors the fuel pump breaks up and small pieces clog the injectors up, leading to the edc codes coming on and effecting performance or cutting out the engine. Obviously Iveco will not admit it at any cost as they would be liable for the recall costs. I recommend what I did and flog it and buy a Daf LF as they seem more reliable.

unknown, April 2011
link Click here to see other fixes for Iveco.