how do you remove front wheelhub to change wheel bearing ?on a 2002 ford transit 350 transit

shaun, September 2006

front wheel drive. wot a pain. i have tried everything. no joy. hub is solid, disc is loose. hub has been beaten to death with no joy. someone mentioned lining up marks????? help!!!!

cornwall rich, May 2010

Hi, does anyone know the torque setting for the front wheel bearing hub on a 02 transit, Cheers Mick. mickanic@ntlworld.com

Mick, October 2006

The reply from Dave sounds like he is talking about a pre 2000 van. As your's is a post 2000 you will nest to say wether it is front or rear wheel drive!

MrMPuk, September 2006

hi first yo need to remove the wheel and to remove the front hub nut u need to pop out the hub centr cap with a screwdriver and pull out the split pin with pointy nose pliers. then you will need to use a 32mm socket to undo the hub nut and once that is done the bearing just pulls out with your fingers remember to take notice of which way it comes out because it has to go back the same way or it will crush it inside the hub. its quite easy to do

Dave2k5uk, September 2006