I replaced one chip as top was blown off and had no power. After chip was replaced register printer just runs and never stops. Is ther something elce I could replace to cure this problem?

C.R., May 2011

If an IC has failed that badly, you will normally find a power supply has also failed or there are other shorted/ open/ leaky components associated with the IC. It sounds like it is probably a motor driver IC that you have replaced. I would check that you have the correct power supplies to the IC first.
---------------------------------

If anyone needs to program a Samsung ER-4940 cash register, the manual is here:

http://the-checkout-tech.com/manuals/cashregisters/Samsung_ER-4940_dealer_pocket_programming_guide_manual.html

Registerman, May 2011