Hi Sunny,
just moved into the house and i have an accenta 8 mini alarm system installed, which was working fine until recently.
it has now developed an intermittent tamper fault which activates when we switch on or off the D/Stairs toilet light/fan.
I cannot see where the fault is
Any ideas ??
ps I have just redecorated my hall where i had to take the pir/internal sounder alarm and control box off the wall but the wiring has not been disturbed
I have checked the wiring in the PIR/IS Alarm and control box and everything appears OK
Any Ideas ??

tickityboo, June 2011

We had our roof replaced recently, and the alarm (Accenta 8) became faulty while they were doing the roof. I suspect you are going to say that they have damaged a wire or something. There is no wiring (as far as I am aware) anywhere near the roof or attic space.The downstairs panel is showing power light (red) and tamper light (red), I am a mechanical engineer by trade, so am ok with electrics to a certain degree. I have checked all the fuses on the main board, all fine, power supply to main board is fine, battery is showing it is fine (and battery was replaced with a genuine one 8 months ago as that went faulty). Any help or suggestions appreciated.

Dave G, July 2017

acorn,nick,alarm guy,where the hell do they come from?i hope that the idiot blows the panel to bits,with himself included,his talk is on the level of his intellect .

gts, June 2011

just two words for u mate,acendum tuo,(latin,look it up)

gts, June 2011

Your not going to fix it yourself are you.
Teach you to mess with something you do not understand.
Dig deep, pay someone.

And as noted being polite might have given you better answers.
The people here as noted are at the top of their game,and give free advice.
But not to rude persons.

Alarm, June 2011

Hi Sunny, thats not the way to address people and you want help from some of the most experienced alarm engineers in the industry.
Yes i have an Idea, Go and find someone else to talk down to.

Nick, June 2011

Who's Sunny?

acorn, June 2011

short answer is,if it worked before you buggered about with it,you have done something wrong!

gts, June 2011