Leith asked ... Bosch Classix Type WKM41 front loader washing machine?    |    Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Noman asked ... Reverse light switch?    |    Click here to ask your question

peugeot 206 n/s door mirror glass removal?

My outside temperature sensor seems to only read 14deg. To acess I need to remove the mirror glass. The handbook says unclip wire retaining spring, this is not there on my model nor the retaining brackets. Can anyone help?
Dave England, June 2011
Thanks d for the advice, but while checking through the system I disconnected the visual display unit on replugging the unit seems to be displaying correctly. Can only think this rebooted the unit. Fingers crossed once again thanks d

Dave England, June 2011
push mirror in as far as poss (rhs of mirror) then u will see wire clip from the other side - use long nose pliers to release one end and pull mirror off. Unfortunately the sensor is not always the culprit...usually a resistor on the temp display circuit board in the dash

d, June 2011
link Click here to see other fixes for Peugeot 206.