Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

random false alarms internal sounders only?

i have a veritas 8 panel installed with a remote keypad, i have 5 pir's installed. this system has worked fine for 2 years, but now with the alarm unset it randomely sets of the internal siren alarm for a few seconds then stops. this can happen at different times and nothing shows on the alarm pannel led's. i have changed the back up battery, but the problem is still the same, could this also be a duff battery or is there someone that has come across this problem before or has any idea to what could be causing this? as at present i have the alarm disconnected and would feel more secure with it working.

many thanks
pete anchor, June 2011
and one thing about gts mr anchor,i will tell you like it is,i dont get dosh from manufac,to praise their products,i go with years of exp in this game,i know what works,and what dosent.we bench test all new panels on market,and i can tell you this,i would not go by scantronic,just have a lok at the panels on here in past posts,how many are veritas?

gts, June 2011
i gave you the answer mate,buy a good panel,if you choose not to listen,fine,?????????????????????

gts, June 2011
many thanks for all your help????

pete anchor, June 2011
Hi GTS, I agree with you, I cant stand the Veritas, or any of Texecom products, I stay well clear, To many issues, I wont use the Premier, it looks cheap ish, keypad isnt all that. At least with Scantronic you know your buying the best available panels, Tried and Tested for many years, I fit the Risco Iwise Quad detectors, have the odd issue with the on board resistor links but it is rare, just swap for normal resistors and problem is solved,

Nick, June 2011
i dont acorn,we still use their vibes now they got em sorted out,i just got very annoyed at their attitude,promised to tell us what was wrong with the new panel,(turned out a sftware prob)did not do us much good with the customer screaming down the fone,was lucky one of our guys was ten mins away,he replaced it with a scanny ,what the manufactures seem to forget,its our comp rep thats on the line,not theirs,how many times have you fitted equip.that was faulty?you bring it back to suppliers,to get told,sorry about that,no mention of compo,for your guys time and wasted fuel,at least with scantronic,i contact them and they give me compo,i.e.free panel,better than nothing mate

gts, June 2011
Well, I remember the huge problems with the Ademco IR650s, we had hundreds fitted, all started going wrong (F/As galore) about 12 to 18 months after fitting. Proved to be a faulty component, ALL had to be replaced, what a nightmare.

Ok. I understand your feelings/problem but it's not right to tarnish the entire equipment range. An unfortunate experience I know.

How come all the car manufacturers survive with all their re-calls over the years? Ademco had problems with the PIRs, didn't do their reputation much good but they got over it. We still used their equipment for years after.

acorn, June 2011
and its not the money,its the damage it did to my company rep with 3 members of the same family ,all where going to use us for their alarms,but when their dads packed up they canceld their orders,and who could blame them,

gts, June 2011
tell you why mate,i fitted a few of their vibe detectors,they all failed we lost £1000. in sales because of them,they gave me £1000.in batteries,pirs,vibe detects,
bell boxes,and their super new panel,the super panel failed after two days,the vibe detectors(box of 25) failed too,now,tell me acorn,would you really rec.them to your customers?i asked the manufactures to let me know what was up with the new panel,they did not,so me old nut,you can use them if you like,but,not this kid,(the vibes they changed the relay that was mechanical,to an electronic switch,but got it wrong)

gts, June 2011
gts, you've really got a down on the Veritas panel haven't you.

Don't really understand why, it serves a purpose.

acorn, June 2011
well pete,buy a better alarm panel,try a scantronic.at least it will work,veritas cheap,and scantronic it will tell you where the fault is,

gts, June 2011
link Click here to see other fixes for Veritas 8.