I am trying to find information on how to fix a GBC4250 Laminator. Until recently we had not had any problems with it, but one a day a co-worker tried to turn it on and it just will not work. No lights come on, no beeping noise that it usually makes when powered up, nothing. We have tried multiple outlets around the office and still nothing. I do not know if there is anything that we can do to fix it or if this is even a common problem. Any help would be greatly appreciated.

Kiddieland, July 2011

I fix roll laminators in pittsburgh for a living. Check the fuse holder if often melts down, make certain the outlet your machine is plugged into has power. thats a common cause of no power.there are the interlock switches one on the clear plastic cover, you should hear a click when the cover is put in the down position. the other interlock switch is a pin tats goes into the side frame and tris a switch. if your anwhere near pittsburgh i give free no cost no obligation estimates. locally GBCs first hour service rate is $317.00 within 25 miles of pittsburgh, thats insane...

if none of these get your machine running theres a thermal fuse that fails in combination with a bad temp sensor but thats not nearly as common as interlock troubles. post back if you need more help bob

bob haller service and sales pittsburgh pa 412 366 4906, July 2011