Hello, I have an Accenta 8 and recently a builder snipped a wire but then connected it again. since then none of the sensors are working - however the keypad has lights on and power is on. Think the fuse has gone..can i replace this myself without alarm going off or do i need to call an technician. If the former can someone let me know how to do it step by step. Thanks in advance. Much appreciated

PP, July 2011

Thanks for advice.

PP, July 2011

AUX fuse has blown. You need a 20mm quick blow fuse, available from Maplin ect.
WARNING mains is present inside the panel, if unsure get someone qualified.
It will go off when opened, enter code and replace fuse blown, a test meter will be needed as a visual inspection is never conclusive. Otherwise its the fuse by the terminal marked 27, the 1st of 3 fuses.
Close lid enter code job done.
As above if unsure call in someone.

Alarm, July 2011