the dishwasher has worked fine until this morning - when I got up the salt/rinse aid light and wash/drying light was on even thought I hadn't used it. There was also water in the dishwasher and I had to manually remove. Checked all the filters and inlet hose and everything seems fine. The only thing we have noticed is the inlet hose was stuck to the back and looks like it started to melt on the foam backing.

DWJ, August 2011

Still not working.

The salt rinse aid and drying/end light are flashing. We've tried everything. there is a horrible rubbery burning smell and I'm not sure if this is the hose, going to buy a new one to see if this is the problem

DWJ, August 2011

Did you find an answer as I have the same problem. The same lights are flashing and we had to manually remove water from the bottom of the machine - ours is only 1 year old so do not think it should have gone wrong yet - how did you sort your problem out KG

Kim G, August 2011

Inlet hose stuck on back, not a real problem, mine is the same. filling with water, when not being used, could be water inlet valve faulty, it would need replacing, its the bit you connect the inlet hose to. If your drain outlet, is low down, water could of been going in for some time with out you noticing it, Water going in would deplete your salt and rinse aid very quick, possibly why the lights were on. Some times, you could turn the program dial, to a point just before end of rinse, and it will pump the water away, rather than have to lift it out

SD, August 2011