hi
was wondering if someone could help me plz
we have an iveco 160e28 and sometimes when
sitting at the lights it wont go into gear
its not all the time
just sometimes it crunches then goes
plz we need help
only purchased 4 months ago and has been in the mechanics so many times
any help would b appreciated gratelly
ty

jenny, August 2011

if its creeping in gear then i would suspect master cylinder at fault;this has a valve in it to hold pressure,the valve must be leaking internally [this is why no leak showing]and allowing slave cyl/booster to gradually engage clutch. hope this helps.

k, August 2011

hi, thanks for your help, there is plently of pressure in the pedals, i dont think it needs bleeding, the reservoir is full, so would there b any leaks??? iam not sure about the air over the hydrolic??? this is only happening with the clutch occasionaly when iam stopped at the set of lights the truck starts to go on its own while my foot is on the brake and i cant move the gears but this is not all the time like i said occasionaly
any help with this is truely appreciated
thanks
jenny

jenny, August 2011

it may be air over hydraulic, if so could be faulty hydraulics,check reservoir level-you could try bleeding it there may be air in system.also have a look for fluid leaks from master cylinder and clutch booster/actuator.

k, August 2011