Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

Zanussi washing machine has code error E90 on it,what is wrong? ?

The zanussi washing machine serial number 52700018 FJDR 1266W shows code error E90 which is not in the manual... what is the problem please
Mary Bennett, September 2011
E90 is a communication error between the main control pcb and the display pcb in the fascia.Take the lid off and there is a blue loom with 5 wires that goes from the main pcb to the display pcb.if the connections become bad this error code comes up.disconnect the blue loom at both ends and tighten the connections and clean the display pcb edge connection.reconnect blue wire and test.if error still persists try a new blue loom,new main pcb or new display pcb.usually its bad connections from this blue loom

ck, September 2011
link Click here to see other fixes for Zanussi.