The inner door has come away from the metal frame on my Zanussi Z360 integrated oven. It seems there is a rubber seal that was holding the glass into the metal and this has lost its "stickiness". Where can I get a seal and how do I get into the door frame to change it? I cannot see any screws on the door unit and both outer and inner glass are inside the metal door frame. The manual with the appliance has no information to help with this problem.

Bex, October 2011

do you want the good news or bad news?
lets start with bad news.You have to buy a whole new inner door frame with the glass attached
The good news is if you totally remove the glass and clean the frame and glass with thinners you can then BUY the sealant which you put a thin bead around the frame and fix the glass back in.to do this you have to remove the whole door.if you look at the hinges there are some locks.flip them and then shut the door. as you shut the door roll and lift it out of the hinge mountings.Now on the bottom edge is 2 screws.remove them and split the door inner and outer frames.refit in reverse

ck, October 2011