Hi, I am unable to open the drivers door from my key card on my Laguna mark 2, I have tried holding the central locking button on the inside for more than 15 secs to no avail.
All the other doors open fine apart from the drivers, thanks in advance.

paulie287, November 2011

Thanks I will give it a try.

paulie287, November 2011

you will have to remove all interior trim on the drivers door to gain access to the door actuation switch /solenoid inside the door.this switch is connected to a arm which connects to the door locking machanism, suspect this or associated wiring .use 12vdc tester to check for voltage at solenoid when cl locking is activated .also check that you have window operation on the door aswell .

mech monster, November 2011