i think my Thermostat has gone how do i replace it

jason, November 2011

hi guys,make and models would have been a good start,regarding T/stat and heater location.in sarahs case if you have changed the stat and element,the problem could lie with the pcb/timer,take a look on the rear of your tumble for a reset swich.all tumbles are different but most thermostats will be actually mounted on the heating element housing.some have one or two.some older models have a T/stat mounted on the fan housing.most tumbles have a bulged panel on the rear which when removed gives access to the heating element and stats.some models you have to remove the entire back panel .

mech monster, November 2011

i have changed my thermostat and heater elements on my tumble dryer and it still wont heat?

sarah, November 2011

the dryer works but it wont get hot on either setting (hot or warm ) not even on the iron mode thats why am thinking the thermostat has failed + we never let it do the cool down mode we just pulled the door open and all i wanna know is where are both the thermostats are located so i can have a look

jason, November 2011

check the heating element first.most heating elements will show visible signs of failure.your lack of information means I cannot help you further :(

mech monster, November 2011